skip to Main Content

Sanitizer Plus Antimicrobial Treatment, for Mold, Mildew and Algae

$14.00$65.20

Change Selection

FREE Shipping on all orders above $20 in the continental US

 
Location : Interior/Exterior
Task : Floor/Deck/walls
Application : Pump Spray Roller
Surface : All Surfaces not Harmed by Water
Base : Water Based
Drytime : 30-60 mins
Coverage : 175-200 sq.ft/gal
Finish : Clear Concentrate Dilute 2-4oz/gal

Sanitizer Plus Biodegradable, AntiMicrobial Professional Mold And Mildew Remover

A powerful antimicrobial treatment, for mold, mildew and algae.

Features

  • High Strength formula
  • Steps re growth algae, mold and mildew
  • Removes odor-causing bacteria
  • Disinfects and Deodorizes
  • Cost-effective dilutes 1:64 with water
  • Biodegradable
  • Formulated for water damage restoration

Typical Uses

Treat and protect from microbial contamination

  • Concrete and brick pavers
  • Natural stone
  • Tile and grout
  • Wood decks and fencing
  • Paneling
  • Concrete and stucco
  • Exterior and Interior
  • Roof tiles

Directions / Application

Sanitizer  Plus should be diluted prior to use.

Mix 2-4 oz. /gallon of water to disinfect porous materials.

Mix 2 oz./gallon of water to disinfect hard, non-porous surfaces.

Apply at a rate of 175 to 200 sq.ft per gal

Treated surfaces must remain wet for 10 minutes.  Apply more material as necessary to keep treated areas wet.

After treatment allow surfaces to air dry.

PDF Downloads

Frequently Asked Questions

Sanitizer Plus Photos

Sanitizer Plus Videos

Back To Top